Technical Data
Certificates
Operating Instructions Oxylog 2000, SW 3.n
56
Materials used
Ventilator enclosure Impact-proof acrylonitrile butadiene styrene (ABS)
Reusable patient circuit silicone rubber
pressure sensing lines
for flow measurement silicone rubber
Flow sensor housing polysulphone (PSU)
Flow sensor orifice membrane stainless steel
Patient valve housing polysulphone (PSU)
Patient valve diaphragms silicone rubber
Membrane keypad on front panel polyester membrane
Certificates
The Oxylog 2000 ventilator has been
tested for electromagnetic compatibility
according to the following
standards and guidelines:
Electromagnetic emissions and IEC 601-1-2
immunity ISO 10794/3
prEN 794-3
MIL-STD-461D/462
RE 101 / RS 101 / CS 101
Vibration and shock test MIL-STD-810E
Flight approval RTCA 160 C
To Next Page
Loading...
Need help?
General
