System Overview
12
Instructions for Use Oxylog 3000 SW 1.n
Front panel with all options
A Screen with screen pages for the specific
application
B Key Alarms for setting and displaying
alarm limits
C Key Settings for setting other
ventilation parameters on the screen
D Key for ventilation mode CPAP, CPAP/ ASB
(CPAP/PS)
E Key for ventilation mode IPPV (CMV),
IPPVAssist (CMVAssist)
F Key for ventilation mode SIMV, SIMV/ASB
(SIMV/PS)
G Key for ventilation modes BIPAP
®
(PCV+),
BIPAP
®
/ASB (PCV+/PS)
H Red and yellow lights as alarm indicators
I Key to suppress the audible alarm for
2 minutes
J Key Alarm Reset for acknowledging alarm
messages
K Key O
2-Inhalat. for changing over to O2
inhalation or key 100 % O
2 for oxygenation
L Key Insp. hold for manual inspiration
M Key O Start/Standby
N Display symbols for the power supply
Charge status of the internal battery
N Mains power supply connected
O Central rotary knob for making selections /
settings and for confirming these
P Control knob for setting the O
2 concentration O2
from 40 % up to 100 %
Q Control knob for setting the maximum
inspiratory pressure Pmax
R Control knob for setting the ventilation
frequency Freq.
S Control knob for setting the tidal volume VT
T Key Curves for zooming the curve
display and changing over between displayed
"Flow" and "Paw" curves
U Key Values for displaying measured
values
MT-799-2000
A C EB D F G
H
I
J
K
L
M
N OP Q
R
S
T
U
Curves