Instructions for Use Oxylog 3000 SW 1.n 17
System Overview
Symbols
Symbol Explanation
,
Start inspiration or hold manually
Display screen window "Settings"
Display screen window "Alarms"
Display screen window measured
"Values"
Change between flow/pressure
curves
Suppress audible alarm for
2 minutes
Acknowledge alarms
Start / Standby key
Upper alarm limit only
Lower alarm limit only
! Advisory message
!! Caution message
!!! Warning message
Attention! Consult accompanying
documents!
Type BF applied part (body
floating)
Settings
Alarms
V alues
Curves
Alarm
Reset
!
Charge status of the internal
battery
N Mains power supply connected
Battery charge
(example: three quarters full)
The device complies with UN
Regulation no. 10, revision 2 with
respect to EMC for use in motor
vehicles.
IPX4 Device protected from water
sprayed from all directions, limited
entrance allowed.
Class II equipment, device pro-
tected against electric shock with
additional safety precautions such
as double or reinforced insulations,
without protective earthing.
Do not dispose of the device as
municipal waste.
Manufacturing date
Manufacturer
DC input
Consult the instructions for use.
Indoor use only
Caution, hot surface!
Warning, dangerous voltage!
Symbol Explanation
E
4 10 R-02 XXXX