Follow the procedures below as well if
MARGIN-*
LOCK
,
SLOT#-* LOCK
,
GUTTER* LOCK
,
CUTTER
LOCK
or
CREASE TOOL (MALE) LOCK
appears.
98
When a Document Jam Has Occurred
J06- * CHECK CUTTER/CREASER/SLOT1/2/3
A document jam has occurred in the cutter/creaser/
slot
1/2/3 section.
Follow the procedures below to remove the jammed
documents.
Press the STOP key to clear the error.
The DC-618 is reset and the error message is
cleared.
Press the JOG (forward) key to eject the document.
1
2
3
J06- * CHECK CUTTER/CREASER/SLOT1/2/3
Remove documents
from
Cutter/Creaser/Slot
1/2/3 section.
to clear
REFERENCE
If you cannot remove the jammed documents in the procedure above, follow the procedure below.
Open the
top cover
.
When removing the document from the slot section:
Top cover
To Next Page
Loading...
Need help?
General
