120
Specifications
Model name DC-618
Product category DC-618 Slitter/Cutter/Creaser Floor stand model
Infeed document size Width: 210−330.5 mm
Length: 210−1000 mm
• Max length of standard feed tray: 520 mm (with optional LPT: 750
mm)
• With document longer than 670 mm, the feeder stack height is
reduced.
• With long sheet, the wastes may need removed at higher frequency.
Minimum fi nishing size Width: 48.0 mm
Length: 50.0 mm
Document type Uncoated, Coated, Laminated, UV coated
Document weight 110 gsm−400 gsm
• Manual Perforation Module: 110 gsm-350 gsm
• Laminated/UV coated stock: within the above range including
lamination/coating layer.
Document curl No curl (within 5 mm, no bent)
Process speed Specifi cation speed
Job With REG off With REG on
A4 SEF
2cut 1 crease
23 ppm 19 ppm
Reference speed
(Measurements from the manufacturer testing)
Job With REG off With REG on
A4 SEF
2cut 1crease
23.99 ppm 19.41 ppm
SRA3
2up A4
19.32 ppm 16.81 ppm
SRA3
21up business card
9.19 ppm 7.48 ppm
• With REG mark on, process speed may be effected by the image
shifts and/or the REG mark setting.
Tolerance ±0.2 mm on programmed position (business card: ±0.3 mm)
• The tolerance of creasing may be effected depending on the number
of creases and their depths.
Feeder capacity 100 mm
Double feed detection Ultrasonic sensor
Number of slits 6 slits/sheet
Slitter module Customer Replaceable Module
Slot1: Margin Slitter Module
Slot2: Center Slitter Module 1
Slot3: Center Slitter Module 2
Margin slit width 3.2−55.0 mm
To Next Page
Loading...
Need help?
General
