Duplo DC-618 User Manual

JOB Entry
50
REFERENCE
The settable values are displayed in the lower left part
of the screen.
REFERENCE
Follow steps 1 to 4 in Wizard. (→ p.37)
There are two programming modes in
Direct
,
Advanced Mode
and
Simple Mode
.
Under the
Environment
-
Environment
screen, select
Simple Mode
for
Basic Mode
.
(→ p.77 4. Basic Mode)
Direct - Simple Mode
JOB Programming
Touch
Direct
.
Wizard
: This helps you program a JOB in a user size
in a simple way.
Advanced
: This programs a JOB by entering a value
of each item.
Follow steps 5 to 7 in
Direct
-
Advance Mode
. (→ p.48)
For the procedures for setting after this, follow steps 14 to 18 in
Wizard
. (→ p.41)
You cannot reprogram the following JOBs in
Wizard
:
• A JOB programmed in
Direct
• A JOB saved in
Wizard
and edited in
Direct
• A JOB saved in
Wizard
by using the PC Controller
Save a new JOB as a different JOB number or clear the JOB already saved and then save
the new one.

Duplo DC-618 Specifications

General

Brand	Duplo
Model	DC-618
Category	Cutter
Language	English