Duplo DC-618 User Manual

vi
Notes on Safety (Please Read and Observe)
WARNING
●
Prohibition of Disassembly or Modifi cation
● Do not modify the machine.
→ Doing so may result in fi re or electric shock.
● Do not remove the rear lid or covers from the machine.
→ The inside of the machine contains high-voltage parts, which may cause electric
shock.
WARNING
●
Caution for Location
● Do not place the machine in a humid or a dusty area.
→ Doing so may result in fi re or electric shock.
CAUTION
● Before moving the machine, remove the power plug from the outlet.
→ If the power cord is damaged, this may result in fi re or electric shock.
● Do not place the machine in an unstable position such as on an unsteady fl oor or
a sloping area.
→ If the machine drops or falls over, it may result in injury.
● Avoid placing the machine in a place subject to direct sunlight or heating
equipment such as a stove.
●
Avoid placing the machine in a place subject to high or low temperature or high
humidity.
→ The document absorbs moisture and it may cause document jam or wrinkles.
● Leave the power cord unplugged when the machine is not used for a long period.
→ The insulation may deteriorate and cause an electrical fi re.
● The machine is not suitable for use in locations where children are likely to be
present.

Duplo DC-618 Specifications

General

Model	DC-618
Category	Cutter
Cutting Speed	Up to 12, 000 sheets/hour
Dimensions	40 x 22 x 32 inches
Weight	150 lbs
Max Cutting Width	600 mm
Max Cutting Thickness	15 mm
Power Supply	50/60Hz
Cutting Capacity	15 mm
Cutting Width	600 mm

Summary

Introduction

Pictorial Symbols and Other Notations

Explains symbols and notations used in the manual for clarity and safety.

Notes on Safety (Please Read and Observe)

General Safety Precautions

Provides essential warnings and instructions to prevent danger to users and property.

Specific Safety Precautions

Details warnings for grounding, power, disassembly, location, cleaning, and preventing injuries.

Locations of Safety Labels

Labels of High-Voltage Warning

Location of Rating Labels

Emergency Stop Function

Interlock System for Safety

Machine Dimensions and Required Space for Operation

Chapter 1 Before Using This Machine

Part Identification and Appearance

Identifies machine parts, their functions, and overall appearance including internal components.

Turning Power ON/OFF

Provides step-by-step instructions for safely powering the machine on and off.

Initial Setup and Preparation

Guides through essential setup like loading documents, setting trays, and adjusting crease width.

Computer Connectivity

Explains how to connect the DC-618 machine to a computer using a USB cable.

Job Programming Basics

Covers essential terms, limitations, and features for programming jobs, including REG marks and barcodes.

Chapter 2 Programming a JOB

Job Programming Interface

Details the main interface screens, including standby and job entry screens for programming.

Job Management and Errors

Covers managing stored jobs and troubleshooting common error messages during programming.

Job Entry Methods

Explains different methods for programming jobs, including Wizard and Direct modes.

Chapter 3 Basic Operations

Retrieving Saved Jobs

Explains how to retrieve saved jobs using JOB number, log, or category.

Processing a JOB in Pause Feeding Mode

Explains how to use the pause feeding mode for temporary stops during job processing.

Process Settings

Details process settings for feed, air, marks, barcode, slit, and crease operations.

Adjustment Settings

Covers machine adjustments for cutter speed, shrinkage compensation, and position offsets.

System Settings

Explains system settings like double feed detection, feeder capacity, batch separation, and stack priority.

Environment Settings

Details environment settings for buzzer, LCD, units, language, categories, and shortcuts.

Processing a JOB with a Barcode

Describes how to process jobs automatically using barcode recognition.

Document Feed Adjustments

Guides on adjusting elevator height, separator height, and skew for optimal document feeding.

Chapter 4 Troubleshooting

When Messages Appear

Lists various error messages and provides solutions for resolving them.

Resolving Document Jams

Provides step-by-step procedures to clear document jams in various sections of the machine.

Chapter 5 Daily Maintenance

Routine Cleaning Procedures

Outlines procedures for cleaning critical components like slitters, sensors, rollers, and suction belts.

Waste Box Management

Explains how to manage and empty the waste box to prevent jams.

Press Roller Protection

Details procedures to protect press rollers from deformation during extended periods of machine inactivity.

Chapter 6 Specifications

Machine Specifications

Lists the technical specifications, dimensions, and performance characteristics of the DC-618 machine.