45
1
2
Program JOB for DC-645 Via Computer (JOB Creator)
Reading JOB from DC-645 (“Upload Job Data from DC-645”)
This describes the procedures to read a JOB from the DC-645 memory to the JOB Creator.
○○○○○○○○○○○○○○○○○○○○○○○○○
Click the [Upload Job Data from DC-
645] button.
The display to select the JOB to read
appears.
○○○○○○○○○○○○○○○○○○○○○○○○○
(To upload all JOB (#1 – #80) from
the DC-645 memory)
Click the [ALL JOB] radio button,
then click the [UPLOAD] button.
Tip
• With the above operations, JOB No.
1 – 80 is saved as 1 file.
(To select and upload only one JOB)
Click the [JOB No.] radio button.
Then select the JOB number to
upload from the following list.
After selecting the JOB number, click the
[UPLOAD] button.
JOB Creator Settings
Continue Page
•••
To Next Page
Loading...
Need help?
General
