87
25
Troubleshooting
––– J 3 –––
CENTER JAM
When a Paper Jam Has Occurred
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Open the top cover 2.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press the <STOP> key to reset the fault logic
and clear the message.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press the <JOG> key and eject the jammed
document to the stacker tray side.
When “CENTER JAM” is Displayed
If a paper jam has occurred in the slitter area, “CENTER JAM” is displayed on the LCD panel and the lamp
blinks on the OK monitor.
Remove the jammed document with the following procedure.
123
456
789
C
0
123
456
789
C
0
■ If the document cannot be removed with the procedure mentioned above
Continue Page
•••