98
When a Paper Jam Has Occurred
When “REJECT AREA JAM” is Displayed
If a paper jam has occurred in the reject area, “REJECT AREA JAM” is displayed on the LCD panel and the
lamp blinks on the OK monitor.
Remove the jammed document with the following procedure.
––– J 8 –––
REJECT AREA JAM
■ If the document cannot be removed with the procedure mentioned above
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Open the front cover and take out the waste
box.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press the <STOP> key to reset the fault logic
and clear the message.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press the <JOG> key and eject the jammed
document to the reject tray side.
123
456
789
C
0
123
456
789
C
0
To Next Page
Loading...
Need help?
General
