93
25
Troubleshooting
When a Paper Jam Has Occurred
––– J 5 –––
OPTION AREA JAM
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Open the top cover 3.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press the <STOP> key to reset the fault logic
and clear the message.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press the <JOG> key and eject the jammed
document to the stacker tray side.
When “OPTION AREA JAM” is Displayed
If a paper jam has occurred in the optional module, “OPTION AREA JAM” is displayed on the LCD panel and
the lamp blinks on the OK monitor.
Remove the jammed document with the following procedure.
123
456
789
C
0
123
456
789
C
0
■ If the document cannot be removed with the procedure mentioned above
Continue Page
•••
To Next Page
Loading...
Need help?
General
