Emerson Process Management GmbH & Co. OHG 2-1
X-STREAM XE
Short Form Manual
HASXEE-SFM-HS
05/2017
2
Installation
Chapter 2
Installation
This chapter describes the proper installation procedure for the various X-STREAM analyzer
versions.
On receipt, check the packaging and its contents thoroughly for damage.
Inform the carrier immediately of any damage to packaging or contents, and keep dam-
aged parts until clarication.
Store the instrument at a dry and clean place, considering the acceptable environmental conditions.
We recommend to keep the packaging available for future transportation, because only the original
packaging ensures proper protection!
Manuals (PDF on USB stick or printed):
• this short form manual
• X-STREAM XE series manual on
USB stick
• infallible containment instruction man-
ual (if applicable to your instrument)
HAZARDS FROM MISSING INFORMATION
Compare the content of your package with the pictures below.
Analyzers for hazardous areas need additional parts, described in the
accompanying documentation refering to hazardous area installations.
Call your local sales ofce if something is missing, and DO NOT continue
to install your analyzer, until all parts are at hand!
Fig. 2-1: X-STREAM XE Analyzers - Scope of Supply
2.1 Scope of Supply
USB
stick
Analyzer
external power
supply with DC
power cable
(XEGK, option)
Trace oxygen cell
(if applicable)
incl. instructions
To Next Page
Loading...
Need help?
General
