Other Settings
Settings related to basic operations
Purpose Setting Methods
To start/stop projection by turning
on/off the main power or plugging
in or unplugging the power plug of
the projector.
Set Direct Power On to On. (Default value: Off)
s Extended - Operation - Direct Power
On p.133
The projector can be powered off directly by the
breaker because it supports the direct shutdown
function.
To disable the automatic shutdown
function.
Set Sleep Mode to Off. (Default value: On)
s Extended - Operation - Sleep Mode p.133
Set A/V Mute Timer to Off.
s
Extended - Operation - A/V Mute Settings -
A/V Mute Timer p.133
To disable buzzer beeps generated
when the projector is powered on/
off.
Set Beep to Off. (Default value: On)
s Extended - Operation - Advanced - Beep
p.133
To operate the projector by
communication command even
when the power of the projector is
off.
Set Standby Mode to Communication On.
(Default value: Communication Off)
s Extended - Standby Mode p.133
To operate the projector by
communication command while
executing A/V Mute.
Set A/V Mute Release to A/V Mute.
s Ex
tended - Operation - A/V Mute Settings -
A/V Mute Release p.133
The default value is Any Button. If you operate
the projector while A/V Mute is on, A/V Mute is
released.
To turn off the power by pressing
the [t] button once.
Set Standby Confirmation to Off. (Default value:
On)
s Extended - Display - Standby Confirmation
p.133
Settings related to display
Purpose Setting Methods
To change the menu position. Change the settings of Menu Position.
s Extended - Display - Menu Position p.133
To change the menu direction. Change the settings of OSD Rotation.
s Extended - Display - OSD Rotation p.133
To prevent the display of menus,
messages, or warnings on the
screen.
Use User Button to set On-Screen Display to
User Button 1, User Button 2, or User Button
3.
s Settings - User Button p.131
When you press the button for which On-Screen
Display is assigned, menus or messages are not
displayed on the screen. When the same button is
pressed, they are displayed again. If On-Screen
Display is enabled, you cannot operate the
Configuration menu (except switching the color
mode and input source).
To disable the display of the
message on the projection screen
when switching the source.
Set Messages to Off. (Default value: On)
s Extended - Display - Messages p.133
You can confirm warning by the display of the
indicator.
s "Reading the Indicators" p.157
Dialogs related to operations and behaviors, laser
warnings, termination of Message Broadcasting,
and projector ID are displayed.
To reduce the display delay of the
image.
Set Image Processing to Fast 1 or Fast 2.
s Signal - Advanced - Image Processing
p.129
Installing the Projector
43
To Next Page
Loading...
Need help?
General
Weight and Dimensions
