Epson EB-L1505U User Manual

You can setup multiple projectors to project one large and wide image.
You can adjust the difference of brightness and color tone between each
projected image to create a seamless screen.
a
• Set 4K Enhancement to Off.
• We recommend setting the focus, zoom, and lens shift at least
20 minutes after you start the projection, because images are not
stable right after turning on the projector.
• If the values for Geometry Correction are large, the image position
adjustment for overlapping images becomes difficult.
• The Test Pattern can be displayed to adjust the projection status
without connecting video equipment.
s "Displaying a Test Pattern" p.31
• If you project a dot by dot image that can be projected without
being enlarged or reduced, you can make adjustments precisely.
Adjustment Procedure
Adjusting automatically online
Images from multiple projectors can be automatically adjusted to match the
image from the projector set as the master projector (Screen Matching).
Before selecting the master projector, set Light Source Mode to Custom for
all projectors, and set Brightness Level to the maximum. Set the projector
with the darkest projected image as the master projector.
s Settings - Brightness Settings - Light Source Mode - Brightness Level
p.131
Advance preparation
(1) Connect all projectors to a network hub using LAN cables.
(2) Turning on the master projector.
(3) Set an ID for the master projector and the remote control.
s "Set the projector ID" p.40
(4) Turn on all projectors.
(5) Set the DHCP to On for all projectors, or check that IP addresses have been
assigned.
s
Network - Network Configuration - Wired LAN - IP Settings
p.142
(6) Make sure that Sleep Mode is set to Off so that it does not turn off while
adjusting.
Adjusting the projected position
(1) Adjust the position (angle) of the projector.
s "Installation Settings" p.29
(2) Adjust the arrangement of the images.
s "Performing tiling automatically" p.91
Adjusting the projected images
(1) Adjust the aspect ratio of the images.
s "Screen Settings" p.30
s
"Changing the Aspect Ratio of the Projected Image " p.78
(2) Adjust the lens shift.
s "Adjusting the Position of the Projected Image (Lens Shift)" p.33
(3) Adjust the zoom and focus.
s "Adjusting the Image Size" p.35
s
"Correcting the Focus" p.36
(4) Adjust small differences in the images.
s "Point Correction" p.72
(5) Adjust the edges of the images.
s "Edge Blending" p.93
s
"Black Level" p.95
(6) Adjust the brightness and tint of the images.
s "Screen Matching" p.99
Multi-Projection Function
90

Epson EB-L1505U Specifications

General

Number of colors	1.073 billion colors
Native aspect ratio	16:10
Projection distance	1.99 - 27.77 m
Projection technology	3LCD
Contrast ratio (typical)	2500000:1
Screen size compatibility	60 - 500 \
Projection distance (tele)	3.3 - 27.8 m
Projection distance (wide)	2 - 17.2 m
Projector native resolution	WUXGA (1920x1200)
Keystone correction, vertical	-45 - 45 °
Keystone correction, horizontal	-30 - 30 °
Built-in display	Yes
Display diagonal	1.03 \
Throw ratio	1.57 - 2.56:1
Focal length range	36 - 57.35 mm
Vertical lens shift range	-60 - 60 %
Horizontal lens shift range	-18 - 18 %
Lamp power	670 W
Light source type	Lamp
Service life of light source	20000 h
Service life of light source (economic mode)	30000 h
3D	No
Video color modes	Cinema, Dynamic, Presentation, sRGB
Analog signal format system	-
Audio (L/R) in	3
Audio (L/R) out	1
Composite video in	0
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN data rates	10, 100 Mbit/s
Noise level	37 dB
Country of origin	China
Noise level (economic mode)	30 dB
Placement	Desktop
Product type	Large venue projector
Product color	Black
Cable lock slot type	Kensington
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	908 W
Power consumption (economy mode)	597 W
Cables included	AC, VGA
Pallet width	800 mm
Pallet height	150 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pack	1 pc(s)
Quantity per pallet	6 pc(s)
Harmonized System (HS) code	85286200

Weight and Dimensions

Depth	492 mm
Width	586 mm
Height	211 mm
Weight	23800 g
Package depth	780 mm
Package width	750 mm
Package height	325 mm
Package weight	33900 g