Epson EH-LS500W User Manual

Basic Operations
30
Adjusting the Volume
You can adjust the volume by using the volume buttons on the remote control or on the control panel.
Remote control Control panel
c
•
You can also adjust the volume from the Configuration menu. s Settings - Volume p.61
•
When an AV System is connected to the projector and you want to adjust the volume for the AV system,
set HDMI Link to On and Audio Out Device to AV System.
s Settings - HDMI Link p.61
Caution
Do not start at high volume.
A sudden excessive volume may cause loss of hearing. Always lower the volume before powering off, so
that you can power on and then gradually increase the volume.
Hiding the Image and Muting the Audio Temporarily (A/V Mute)
Press the A/V mute button on the remote control to show or hide the image. The audio is also muted or played.
c
•
For movies, the image and audio continue to play even during A/V Mute. You cannot resume projection
from the point that you muted the video and audio using the A/V mute button.
•
When outputting audio from an AV system and you want to adjust the volume for the AV system, set
HDMI Link to On and Audio Out Device to AV System.
s Settings - HDMI Link p.61

Epson EH-LS500W Specifications

General

Brand	Epson
Model	EH-LS500W
Category	Projector
Language	English