Adjusting the Image
31
Adjusting the Image
Selecting the Projection Quality (Color Mode)
You can obtain the optimum image quality to suit your surroundings when projecting. The brightness of the
image varies depending on the mode selected.
a
Press the [Menu] button to display menus in the order Image - Color Mode.
Remote control Control panel
c
If you press the [Home] button on the control panel or the home button on the remote control,
you can also make settings from the Home screen.
s
p.24
b
Use the up and down buttons to select a mode, and then press the [Enter] button to confirm
the selection.
Mode Application
Dynamic
This is the brightest mode. Best for prioritizing brightness.
Bright Cinema
Best for projecting vivid images.
Cinema
Best for enjoying content such as movies.
Game
Best for enjoying content such as video games.
Switching the Screen Between Full and Zoom (Aspect)
You can change the input signal's type, aspect ratio, and resolution to match the Aspect of the projected
image.
The available settings vary depending on the image signal currently being projected.
c
Note that using the aspect ratio function of the projector to reduce, enlarge, or split the projected
image for commercial purposes or for public viewing may infringe upon the rights of the copyright
holder of that image based on copyright law.
To Next Page
Loading...
Need help?
General
