Epson EH-LS500W User Manual

Troubleshooting
73
When the Indicators Provide No Help
Check the problem
Check the following table to see if your problem is mentioned, and go to the appropriate page for information
on handling the problem.
Problem Page
Problems relating to im-
ages
No images appear
Projection does not start, the projection area is completely black, or
the projection area is completely blue.
p.74
Moving images are not displayed p.74
"Not supported" is displayed
p.74
"No Signal" is displayed
p.75
Keystone distortion of projected image p.75
Images are fuzzy or out of focus p.75
Interference/distortion appear in images p.75
Part of the image is truncated (large) or small p.76
Image colors are not right
The whole image appears purplish or greenish, images are black &
white, or colors appear dull.
*
p.76
Images appear dark p.76
Projection stops automatically p.77
Noise problems No audio, or the audio is too low p.77
Problems when projection
starts
The projector does not turn on p.77
Problems with the remote
control
The remote control does not respond p.78
Problems with the control
panel
Cannot make settings on the control panel p.78
Problems with 3D Cannot project correctly in 3D p.78
Problems with HDMI HDMI Link does not function p.79
The device name is not displayed under Device Connections p.80
Problems with a streaming
media player
Cannot view images from a streaming media player p.80
Network problems Cannot access the network via wireless LAN p.80
The settings cannot be modified using the remote controller function
for Epson iProjection
p.80
The image contains static during network projection p.81
*
Because color reproduction differs between monitors and computer LCD screens, the image projected by the
projector and the color tones displayed on the monitor may not match, however this is not a fault.

Epson EH-LS500W Specifications

General

Brand	Epson
Model	EH-LS500W
Category	Projector
Language	English