Epson EH-LS500W User Manual

Adjusting the Image
34
Adjusting Image Resolution (Image Enhancement)
You can adjust the resolution of the image using the Image Enhancement function.
The following content can be adjusted.
4K Enhancement
*3
4K Enhancement is a function that projects an image at a doubled res-
olution by diagonally shifting 1 pixel in increments of 0.5 pixels.
A high-resolution image signal is projected in fine detail.
Image Preset Mode
Select the settings prepared in advance as the settings for Noise Re-
duction, MPEG Noise Reduction, Super-resolution, and Detail En-
hancement.
Frame Interpolation
*1 *2 *3
Plays movies smoothly. s p.35
Deinterlacing
*1 *2
Converts the signal from interlaced to progressive using a method ap-
propriate for the image signal.
Noise Reduction
*1 *2 *3 *4
Smoothes out rough images.
MPEG Noise Reduction
*1 *2 *3
*4
You can reduce dot and block noise that occurs in outlines when pro-
jecting MPEG movies.
Super-resolution
*2
Fine Line Adjust: Enhances the contrast and the outlines of complicated
images.
Soft Focus Detail: Enhances the contrast and the outlines for smooth
backgrounds.
Detail Enhancement
*2
Enhances the contrast in an image to create a more emphatic texture
and material feel.
Strength: The larger the value, the stronger the contrast.
Range: The larger the value, the wider the range of detail enhancement
becomes.
*1
This can only be set when Signal - Advanced- Image Processing is set to Fine.
*2
This can be set at any time except when Image Preset Mode is set to Off.
*3
This cannot be set when 4K signals are being input.
*4
This cannot be set when 21:9 signals are being input.
a
Press the [Menu] button to display
menus in the order Image - Image
Enhancement.
Remote control Control panel
b
Use the up and down buttons to select
the item you want to adjust, and then
press the [Enter] button to confirm the
selection.

Epson EH-LS500W Specifications

General

Brand	Epson
Model	EH-LS500W
Category	Projector
Language	English