Introduction
8
c
When the Illumination function is set to Off, all indicators are off under normal projection conditions.
s
Extended - Operation - Illumination p.63
Rear/Top
Name Function
a
Lens
Images are projected from here.
b
Security cable sec-
tion
Secure a commercially available anti-theft wire lock through this section.
c
Power inlet
Connect the power cord.
d
Security slot ( )
The security slot compatible with the MicroSaver security system manufactured
by Kensington. For more details, visit the homepage of Kensington at http://
www.kensington.com/.
e
Air exhaust vent
Exhaust vent for air used to cool the projector internally.
Caution
While projecting, do not put your face or hands near the air exhaust vent,
and do not place objects that may become warped or damaged by heat near
the vent. Hot air from the air exhaust vent could cause burns, warping, or
accidents to occur.
f
Remote receiver
Receives signals from the remote control. s p.21
To Next Page
Loading...
Need help?
General
