Configuration Menu
61
Function Menu/Settings Explanation
Reset
Yes, No
Resets all Signal settings except for Diagonal
Screen Size, 3D Viewing Notice, and Aspect.
*1
Settings are saved for each type of input source or signal.
*2
You may not be able to make selections depending on the source or type of signal.
Settings menu
Function Menu/Settings Explanation
Installation
Guide
- Displays a guide so that you can adjust the posi-
tion during installation.
Keystone
H/V-Keystone
V-Keystone -12 to 12
Corrects keystone distortion. s p.28
•
H/V-Keystone: Manually corrects horizontal and
vertical distortions.
s p.28
•
Quick Corner: Corrects the corners of the pro-
jected image individually.
s p.29
H-Keystone -12 to 12
Quick Corner -
Blanking
Covers part of the image with a blank (black
screen). You can set the top, bottom, left, or right
of the image.
Zoom
Adjusts the size of the image. s p.26
Image Shift
- Adjusts the position of the projected image with-
out having to move the projector.
s p.27
Volume
Adjusts the volume.
HDMI Link
Device Connections - Displays a list of devices connected to the
HDMI1/HDMI2/HDMI3 ports.
HDMI Link On, Off Enables or disables the HDMI Link function.
Audio Out Device Projector, AV Sys-
tem
Selects which device outputs audio.
s p.46
Power On Link Off, Bidirectional,
Device -> PJ, PJ ->
Device
Sets the link function when the power is turned
on.
•
When linking operations to the connected de-
vice and turning on the projector, select Bidir-
ectional or Device -> PJ.
•
When linking power on for the projector to the
connected device, select Bidirectional or PJ ->
Device.
Power Off Link On, Off Sets whether or not to power off connected de-
vices when the projector is turned off.
Link Buffer On, Off If HDMI Link is not working correctly, you may be
able to improve it by changing the settings.
To Next Page
Loading...
Need help?
General
