Cleaning the Printer
If the components and the case are dirty or dusty, turn o the printer and clean them using a so, clean cloth that
has been dampened with water. If you cannot remove the dirt, try adding a small amount of mild detergent to the
damp cloth.
c
Important:
❏ Be careful not to get water onto the printer mechanism or any electrical components. Otherwise, the printer
could be damaged.
❏ Never use alcohol or paint thinner to cleanthe components and the case. ese chemicals can damage them.
Cleaning Spilled ink
If ink has been spilled, clean it up in the following ways.
❏ If ink adheres to the area around the tank, wipe it o using a napless, clean cloth or cotton swab.
❏ If ink spills on the desk or oor, wipe it o immediately. When ink is dried, it will be dicult to remove the
smear. To prevent the smear from spreading, blot the ink with a dry cloth, and then wipe it with a moist cloth.
❏ If ink gets on your hands, wash them with water and soap.
Checking the Total Number of Pages Fed Through the
Printer
You can check the total number of pages fed through the printer. e information is printed together with the
nozzle check pattern.
1.
Select Maintenance on the printer's control panel.
To select an item, use the
u
d
l
r
buttons, and then press the OK button.
2.
Select Nozzle Check.
3.
Follow the on-screen instructions to load paper and print the nozzle check pattern.
Maintaining the Printer
>
Checking the Total Number of Pages Fed Through the Printer
128
To Next Page
Loading...
Need help?
General
