Before Using Fax Features
Faxing feature is available only for ET-4800 Series/L5290 Series.
Check the following before you start using the fax features.
❏ e printer and the phone line, and (if it is being used) the phone machine are connected correctly
❏ Fax basic settings (Fax Setting Wizard) is complete
❏ Other necessary Fax Settings are complete
See "Related Information" below to make settings.
Related Information
& “Connecting the Printer to a Phone Line” on page 89
& “Making the Printer Ready to Send and Receive Faxes” on page 92
& “Basic Settings Menu” on page 262
& “Making Settings for the Printer's Fax Features According to Use” on page 94
& “Fax Settings” on page 262
& “Making Contacts Available” on page 97
& “User Default Settings Menu” on page 266
& “Report Settings Menu” on page 265
Connecting the Printer to a Phone Line
Compatible Telephone Lines
You can use the printer over standard analogue telephone lines (PSTN = Public Switched Telephone Network) and
PBX (Private Branch Exchange) telephone systems.
You may not be able to use the printer with the following phone lines or systems.
❏ VoIP phone line such as DSL or
ber-optic
digital service
❏ Digital phone line (ISDN)
❏ Some PBX telephone systems
❏ When adapters such as terminal adapters, VoIP adapters, splitters, or DSL router are connected between the
telephone wall jack and the printer
Related Information
& “Connecting the Printer to a Phone Line” on page 89
Connecting the Printer to a Phone Line
Connect the printer to a telephone wall jack using an RJ-11 (6P2C) phone cable. When connecting a telephone to
the printer, use a second RJ-11 (6P2C) phone cable.
Depending on the area, a phone cable may be included with the printer. If it is included, use that cable.
Faxing
>
Before Using Fax Features
>
Connecting the Printer to a Phone Line
89
To Next Page
Loading...
Need help?
General
