❏ Follow paper handling precautions.
“Paper Handling Precautions” on page 30
❏ Load paper in the correct direction, and slide the edge guide against the edge of the paper.
“Loading Paper” on page 31
❏ Raise the ADF document support.
❏ Do not load more than the maximum number of sheets
specied
for paper.
❏ Load one sheet of paper at a time if you have loaded several sheets of paper.
❏ Make sure the paper size and paper type settings match the actual paper size and paper type loaded in the
printer.
“List of Paper Type” on page 31
It is Time to Rell the Ink
Ink Bottle Handling Precautions
Read the following instructions before relling ink.
Storing precautions for ink
❏ Keep the ink bottles out of direct sunlight.
❏ Do not store the ink bottles in high or freezing temperatures.
❏
Aer
bringing an ink bottle inside from a cold storage site, allow it to warm up at room temperature for at least
three hours before using it.
❏ Once you open an ink bottle, we recommend using it as soon as possible.
❏ Epson recommends using the ink bottle before the date printed on the package.
❏ Do not open the ink bottle package until you are ready to ll the ink tank. e ink bottle is vacuum packed to
maintain its reliability. If you leave an ink bottle unpacked for a long time before using it, normal printing may
not be possible.
❏ When storing or transporting an ink bottle, do not tilt the bottle and do not subject it to impacts or temperature
changes. Otherwise, ink may leak even if the cap on the ink bottle is tightened securely. Be sure to keep the ink
bottle upright when tightening the cap, and take precautions to prevent ink from leaking when transporting the
bottle, for example, putting the bottle in a bag.
Solving Problems
>
It is Time to Rell the Ink
>
Ink Bottle Handling Precautions
230
To Next Page
Loading...
Need help?
General
