Epson LS3-401 series User Manual

Setup & Operation 3. Environments and Installation
36 LS Rev.10
3.5 Installation Procedure
CAUTION
■
The robot system
must be installed to avoid
interference with buildings,
structures, utilities, other
machines and equipment that may create a trapping
hazard or pinch points.
■
Oscillation (resonance) may
occur during operation depending on rigidity of the
installation table.
If the oscillation occurs, improve rigidity of the table
or change the speed or
acceleration
and deceleration settings.

Epson LS3-401 series Specifications

General

Brand	Epson
Model	LS3-401 series
Category	Robotics
Language	English