Maintenance Box Code
Epson recommends the use of a genuine Epson
maintenance box.
The following is the code for the genuine Epson
maintenance box.
Code
T2951
Maintenance Box
Handling Precautions
Read the following instructions before replacing the
maintenance box.
❏ Do not touch the green chip on the side of the
maintenance box. Doing so may prevent normal
operation and printing.
❏ Do not tilt the used maintenance box until after it is
sealed in the plastic bag; otherwise ink may leak.
❏ Do not drop the maintenance box or subject it to
strong shocks.
❏ Do not replace the maintenance box when the
printer is on; otherwise, ink may leak.
❏ Do not replace the maintenance box during
printing; otherwise, ink may leak.
❏ Do not reuse a maintenance box which has been
removed and left detached for a long period. Ink
inside the box will have solidified and no more ink
can be absorbed.
❏ Do not remove the maintenance box and its cover
except when replacing the maintenance box;
otherwise ink may leak.
❏ Keep the maintenance box out of direct sunlight.
❏ Do not store the maintenance box in high or
freezing temperatures.
❏ Do not touch the sections shown in the illustration.
Doing so may prevent normal operation and you
may get smeared with ink.
PM-520 Operation Guide
Replacing Ink Cartridges and Other Consumables
43
To Next Page
Loading...
Need help?
General