Be careful when you handle used ink cartridges, as there may be some ink around the ink supply
port.
If ink gets on your skin, wash the area thoroughly with soap and water.
If ink gets into your eyes, flush them immediately with water.
If discomfort or vision problems continue after a thorough flushing, see a doctor immediately.
If ink gets into your mouth, see a doctor right away.
Instructions for the AC Adapter
❏ The AC adapter cord should be placed to avoid abrasions, cuts, fraying, crimping, and kinking. Do not place
objects on top of the cord and do not allow the AC adapter or the cord to be stepped on or run over. Be particularly
careful to keep the cord straight at the end.
❏ If you are not going to use the product for a long period, be sure to unplug the AC adapter from the electrical
outlet.
Safety Instructions for the Maintenance Box
❏ Do not disassemble the maintenance box; otherwise ink may get into your eyes or on your skin.
❏ Keep the maintenance box out of the reach of children.
Safety Instructions for the Optional Battery
❏ Use an Epson Li-ion battery model C12C932941 or C12C932951 for this printer according to the directions in the
user documentation. Do not use the battery with non-rechargeable batteries (primary cell batteries) or with
rechargeable batteries (secondary cell batteries) of different capacities or types. Use of batteries not designed for
this printer can cause excessive discharging during use, and an excessive current to flow during charging. As a
result, the battery could become hot, emit smoke, rupture, or catch fire.
❏ Do not place the battery in a microwave oven or a high-pressure container. Otherwise, the battery could become
hot, emit smoke, rupture, or catch fire.
❏ Do not drop or throw the battery or subject it to strong shocks. Otherwise, the battery could leak or the protection
circuit in the battery could be damaged. As a result, the battery could become hot, emit smoke, rupture, or catch
fire.
❏ Do not use or leave the battery in a hot location (more than 50˚C), such as near a fire or a heater. Otherwise, the
plastic separator could melt and the individual cells could short-circuit. As a result, the battery could become hot,
emit smoke, rupture, or catch fire.
❏ Do not leave the battery in a vehicle. Otherwise, the battery could overheat.
❏ Do not expose the battery to high humidity.
❏ Do not handle the battery with wet hands or use it in locations near water. If the battery gets wet or is immersed in
water, an excessive current will flow during charging. As a result, the battery could become hot, emit smoke,
rupture, or catch fire.
PM-520 Operation Guide
Important Instructions
7
To Next Page
Loading...
Need help?
General