Epson SC-F2000 User Manual

SC-F2000 Revision C
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 173
Confidential
3.4.6.5 BELLOWS ASSY
1. Remove the FRONT SUB COVER. (p80)
2. Remove the PLATEN. (p71)
3. Move the Table Feed Mechanism to the rear.
4. Remove the two screws that secure the BELLOWS ASSY.
A) Silver M3x8 Cup S-tite screw: 2 pcs
5. Move the Table Feed Mechanism to the front.
6. Remove the two screws, and remove the BELLOWS ASSY.
B) Silver M3x8 Cup S-tite screw: 2 pcs
Figure 3-135. Removing the BELLOWS ASSY
 Pay attention to the positioning points (See Figure 3-135).
 Pull out the Table Feed Mechanism as far as it goes, and secure
it with the screws in the order of screw B and screw A.
B
B
Positioning point
Table Feed
Mechanism
BELLOWS ASSY
Positioning point
BELLOWS ASSY
A
A

Epson SC-F2000 Specifications

General

Brand	Epson
Model	SC-F2000
Category	Printer
Language	English