Epson SC-F2000 User Manual

SC-F2000 Revision C
PRODUCT DESCRIPTION Operation panel specifications 25
Confidential
Administrator Menu
Network Setup
IP Address Setting
Auto
Choose IP address setup either from [Auto] (uses DHCP) or [Panel] (manual). If [Panel] is
chosen, [IP Address], [Subnet Mask] and [Default Gateway] should be configured.
Panel
Print Status Sheet Print
Prints the list of set up state of this printer.
Each information can be checked collectively.
A USB memory should not be inserted to the printer before the printing. If so, the data may be
overwritten or the printing may end incompletely.
Restore Settings
Yes
Undo each setup level of Network Setup to default level.
No
Preferences
Date & Time
YY/MM/DD HH:MM
MM/DD/YY HH:MM
Set up the time of built-in clock. This time is used for printing job history or printer status.
Language
Japanese
Choose display language for the operation panel screen.
English
French
Italian
German
Portuguese
Spanish
Dutch
Russian
Korean
Chinese
Unit: Length
m
Choose unit of length used for the notation on the operation panel screen or for pattern printing.
ft/in
Reset All Settings
Yes Choose [Yes] to undo each setup to default level. Exceptions are shown below.
 Date & Time
 Language
 Maintenance Mode
Initialization does not change the mode in use (White Ink Mode, Color Ink Mode, high speed
Color Ink Mode).
No
Table 1-15. Setup menu
Menu Set up Item/level (shaded area: default setting) Description

Epson SC-F2000 Specifications

General

Brand	Epson
Model	SC-F2000
Category	Printer
Language	English