SC-F2000 Revision C
PRODUCT DESCRIPTION Operation panel specifications 26
Confidential
Maintenance Mode
(Turn the printer on
while pressing the
[Cancel] button.)
Custom XXX Normally, users cannot use this menu.
Sleep Mode
OFF
When no error is occurred and no print job has not received or the operation panel has not been
touched for a certain period of time, the machine will shift automatically to sleep mode. In this
setup, the time before shifting the printer to sleep mode can be chosen. When it goes into sleep
mode, the display of the operation panel goes off and the internal motor stops. Power
consumption can be reduced. Display turns on if the operation panel is touched. It turns off if it is
not touched for 30 seconds. Recovers completely after operating hardware such as print job
reception.
5 to 180 minutes later
(default values “30”).
Reset All Settings
Yes Choose [Yes] to undo each setup to the default level. Exceptions are shown below.
Date & Time
Language
Custom
Initialization does not change the data of the mode in use (White Ink Mode, Color Ink Mode,
high speed Color Ink Mode).
No
Table 1-15. Setup menu
Menu Set up Item/level (shaded area: default setting) Description
To Next Page
Loading...
Need help?
General