1. Safety
10 Safety and Installation (T, VT / EPSON RC+ 7.0) Rev.15
1.3.1 Safety-related Requirements
Specific tolerances and operating conditions for safety are contained in the manuals
for the Manipulator, Controller and other devices. Be sure to read those manuals
as well.
For the installation and operation of the robot system, be sure to comply with the
applicable local and national regulations.
Robot system safety standards and other examples are given in this chapter.
To ensure that safety measures are satisfied, also refer to these standards.
(Note: The following is a partial list of the necessary safety standards.)
Robots and robotic devices -- Safety requirements for industrial
robots -- Part 1: Robots
Robots and robotic devices -- Safety requirements for industrial
robots -- Part 2: Robot systems and integration
American National Standard for Industrial Robots and Robot
Systems -- Safety Requirements
Safety of machinery -- General principles for design -- Risk
assessment and risk reduction
Safety of machinery -- Safety-related parts of control systems -- Part
1: General principles for design
Safety of machinery -- Emergency stop function-- Principles for
design
EN ISO 13855
Safety of machinery -- Positioning of safeguards with respect to the
approach speeds of parts of the human body.
EN ISO 13857
Safety of machinery -- Safety distances to prevent hazard zones
being reached by upper and lower limbs.
Safety of machinery -- Guards -- General requirements for the design
and construction of fixed and movable guards
EN 60204-1
Safety of machinery -- Electrical equipment of machines -- Part 1:
General requirements
EN55011
Industrial, scientific and medical (ISM) radio-frequency equipment
-- Electromagnetic disturbance characteristics -- Limits and methods
of measurement
EN 61000-6-2
Electromagnetic compatibility (EMC) -- Part 6-2: Generic standards
-- Immunity for industrial environments
To Next Page
Loading...
Need help?
General
