EasyManuals Logo
Home>Epson>Printer>WorkForce AL-M300DN

Epson WorkForce AL-M300DN User Manual

Epson WorkForce AL-M300DN
225 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #138 background imageLoading...
Page #138 background image
Precautions for clearing jammed paper
Be sure to observe the following points when you clear jammed paper.
Do not remove jammed paper by force. Torn paper can be difficult to remove and might cause
other paper jams. Pull the paper gently and steadily to avoid tearing it, falling down, and injuring
yourself.
Always try to remove jammed paper with both hands to avoid tearing it.
If jammed paper is torn and remains in the printer, or if paper is jammed in a place not mentioned
in this section, contact your dealer.
Make sure that the paper type that is loaded is the same as the Paper Type setting in the printer
driver.
!
Caution:
Unless specifically instructed in this guide, be careful not to touch the fuser, which is marked
with a caution label, or the surrounding areas. If the printer has been in use, the fuser and the
surrounding areas may be very hot. If you must touch one of these areas, wait 40 minutes to
allow the heat to subside before doing so.
Do not insert your hand deep into the fuser unit as some components are sharp and may cause
injury.
Paper Jam B (Cover B)
1. Open cover B.
AL-M300/AL-M400 Series User's Guide
Troubleshooting 138

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson WorkForce AL-M300DN and is the answer not in the manual?

Epson WorkForce AL-M300DN Specifications

General IconGeneral
BrandEpson
ModelWorkForce AL-M300DN
CategoryPrinter
LanguageEnglish

Related product manuals