Note:
The printer does not enter the deep sleep mode in the following cases:
- PS3 is selected in Network of Emulation Menu.
- MS Network is set to On in Network Menu.
To recover from the deep sleep mode, press the Wakeup/Sleep button. The printer recovers
automatically when it receives a print job.
Power Off Timer (Power Off mode) (For EU models only)
When this setting is set to On, the printer automatically turns off at the time specified in the Time to
Off setting. The printer does not enter the power off mode if it is receiving or sending data.
The printer recovers from the power off mode when the power switch is turned on.
Time to Off (For EU models only)
Specifies the length of the time until the printer enters the power off mode if there are no button
operations and no jobs to be printed.
Note:
You can adjust the time before power management is applied. Any increase will affect the product's
energy efficiency. Please consider the environment before making any change.
Support Menu
Enter the SUPPORT MODE by pressing the d Down button while turning the printer on, to make
Support Menu and Printer Adjust Menu appear.
c
Important:
When formatting the CompactFlash or deleting the data, unplug the interface cables and do not
print files.
Support StatusSheet
Prints a sheet showing information about settings of Support Menu and Printer Adjust Menu.
Format CompactFlash (For AL-M400 Series only)
Formats the CompactFlash memory in the printer if a CompactFlash memory is installed.
AL-M300/AL-M400 Series User's Guide
Using the Control Panel 89
To Next Page
Loading...
Need help?
General