Optional RAM capacity Total RAM capacity RAM Disk capacity
Normal Maximum
128 MB 256 MB 64 MB 128 MB
256 MB 384 MB 128 MB 256 MB
512 MB 640 MB 256 MB 512 MB
1024 MB 1152 MB 512 MB 1024 MB
Convert to Simplex
In the duplex printing mode, specifies whether to print the last page of a job in one side printing mode.
Setting Odd Page or 1 Page can prevent the last page from being printed on an unexpected page
when you are printing on preprinted paper or hole-punched paper.
Odd Page: 1-page jobs or the last page of a job with an odd number of pages are printed in one side
printing mode.
1 Page: 1-page jobs are printed in one side printing mode.
Off: The last page of all jobs (including 1-page jobs or jobs with an odd number of pages) is printed in
duplex printing mode.
Confirm Media Type
Displays a message when the paper type in the tray selected for printing is different from that selected
on Paper Type in the printer driver.
Job Info.
Displays job information on the control panel, also skipping and canceling printing jobs can be done
with this setting. The pattern of items displayed on the control panel can be selected from Display
Pattern 1 and Display Pattern 2. Do not select Display Pattern 1 when the following
languages are selected as Language on Setup Menu: Norsk,
, , Türkçe, ,
, .
Reset Menu
Clear Warning
Clears warning messages that show errors except for these that occur from consumable products or
mandatory-replacement parts.
AL-M300/AL-M400 Series User's Guide
Using the Control Panel 74
To Next Page
Loading...
Need help?
General