❏ If you use an extension cord, make sure that the total of the ampere ratings on the products
plugged into the extension cord does not exceed the extension cord ampere rating.
❏ When connecting this product to a computer or other device with a cable, ensure the correct
orientation of the connectors. Each connector has only one correct orientation. Inserting a
connector in the wrong orientation may damage both devices connected by the cable.
❏ Use only optional products, such as the paper cassette units and the printer stand, produced
specifically for this product. Using options produced for other products may cause the product to
fall over and injure someone.
Finding the place for the printer
When relocating the printer, always choose a location that has adequate space for easy operation and
maintenance. Use the following illustration as a guide for the amount of space required around the
printer to ensure smooth operation.
AL-M300 Series AL-M400 Series
a. 40cm b. 40cm
c. 10cm d. 60cm
e. 90cm f. 40cm
To install and use any of the following options, you will need the indicated amount of additional
space.
AL-M300/AL-M400 Series User's Guide
Safety Instructions 15
To Next Page
Loading...
Need help?
General