EVCO S.p.A.
c-pro 3 nano CHIL | Application manual ver. 1.0 | Code 144CP3NCHE104
page 68 of 90
8.18 Time Schedule
The real-time clock lets the worker set a weekly schedule for the unit.
You can set two different daily schedules. Each daily schedule can have two zones with separate heating and cooling offset values.
Every day of the week can be assigned to daily schedule 1, daily schedule 2, or can be identified as a non-workday.
Below are the parameters for this function:
PARAMETERS FUNCTION
PT01 Workday 1 enables zone 1
PT02 Workday 1 zone 1 start time
PT03 Workday 1 zone 1 end time
PT04 Workday 1 zone 1 cooling offset
PT05 Workday 1 zone 1 heating offset
PT06 Workday 1 enables zone 2
PT07 Workday 1 zone 2 start time
PT08 Workday 1 zone 2 end time
PT09 Workday 1 zone 2 cooling offset
PT10 Workday 1 zone 2 heating offset
PT11 Workday 2 enables zone 1
PT12 Workday 2 zone 1 start time
PT13 Workday 2 zone 1 end time
PT14 Workday 2 zone 1 cooling offset
PT15 Workday 2 zone 1 heating offset
PT16 Workday 2 enables zone 2
PT17 Workday 2 zone 2 start time
PT18 Workday 2 zone 2 end time
PT19 Workday 2 zone 2 cooling offset
PT20 Workday 2 zone 2 heating offset
PT21 Monday schedule
PT22 Tuesday schedule
PT23 Wednesday schedule
PT24 Thursday schedule
PT25 Friday schedule
PT26 Saturday schedule
PT27 Sunday schedule
PH16 Enables start-up/shutdown of the machine as per the schedule
8.19 Management of Other Parameters
To Next Page
Loading...
Need help?
General
