To Next PageTo Next PageTo Previous PageTo Previous Page
Need help?Do you have a question about the Evco c-pro 3 nano CHIL and is the answer not in the manual?
General| Brand | Evco |
|---|---|
| Model | c-pro 3 nano CHIL |
| Category | Controller |
| Language | English |
Describes interface types and key functions for interaction.
Explains menu access levels and password management.
Comprehensive list of all configurable parameters, their codes, and descriptions.
Lists configurations for analogue outputs.
Lists configurations for digital outputs.
Procedures for turning the machine ON/OFF via different methods.
Lists I/O configurations for chillers with EVDRIVE03.
Proportional control for compressors using lateral bands.
Details compressor states and management overview.
Balancing compressor hours and the pump-down process.
Balancing compressor hours and the pump-down process.
Manages high and low temperature alarms.
Monitors primary exchanger efficiency.
Monitors high pressure using a switch.
Manages high-pressure alarms via transducers.
Monitors low pressure using a switch in chiller mode.
Manages low pressure alarms via transducers in heat pump mode.
Handles low pressure start alarms, indicating potential Freon leak.
Controls EVDRIVE03 driver operation via CAN bus.
Sets PID parameters for EVDRIVE03 cooling/heating modes.
Adjusts Superheat (SH) setpoint for efficiency and safety.
Restores all system parameters to their original preset values.
Overview and procedures for managing manual and automatic alarms.
Procedures for resetting manual alarms.
