Fluke OptiView III Series User Manual

OptiView
TM
Series III
Getting Started Guide
34
Refresh analyzer list
Re-displays the analyzer list with current active analyzers.
Launch user interface for selected analyzer
Launches the user interface for the selected analyzer. The selected analyzer is the
device that is highlighted in the OptiView Browser
TM
analyzer list or the IP address
entered in the OptiView Browser
TM
IP address field.
Launch Web browser for selected OptiView Integrated Network Analyzer
Enabled only for OptiView
TM
Integrated Network Analyzers and not for
OptiView
TM
Workgroup analyzers. Launches the default web browser on your PC
(or analyzer) and connects to the home page on the selected OptiView
TM
Integrated
Network Analyzer. From the home page, you can access saved reports and packet
capture files located on the hard drive of the OptiView
TM
Integrated Network
Analyzer.
Update firmware for selected OptiView
TM
Workgroup Analyzer
This button does not apply to OptiView
TM
Integrated Network Analyzers.
Updates the firmware on the OptiView
TM
Workgroup analyzer by downloading
from the controlling PC. Enabled only when selecting an OptiView
TM
Workgroup
analyzer through the Management port.

Fluke OptiView III Series Specifications

General

Brand	Fluke
Model	OptiView III Series
Category	Measuring Instruments
Language	English