TGA300 Rev180405
6
GENERAL DESCRIPTION
The all-in-one pressure governor and instrument panel is programmed from the
factory or during installation. It is compatible with the following engines types:
TGA301/401 Cummins IS Series
TGA302/402 Detroit Diesel
TGA304/404 Navistar
TGA305/405 Caterpillar
TGA306/406 Ford
TGA307/406 Mack
TGA308/408 Scania
TGA310/410 Mercedes
TGA316/416 John Deere
TGA324/424 MAN
TGA326/426 IVECO
All controls and indicators are located on the front of the control module.
Components
The information available on the J1939 databus varies depending on the particular
engine type. The sensors (if any) that need to be installed will also vary depending on
the engine.
The INControl pressure governor and instrument panel consist of the following
components:
Control Module
Intake Pressure Sensor
Discharge Pressure Sensor
Audible Alarm Buzzer
Engine Oil Pressure Sensor (As Necessary)
Engine Coolant Temperature Sensor (As Necessary)
Transmission Temperature Sensor (As Necessary)
Cables
To Next Page
Loading...
Need help?
General
