5 Scan
270
Scan
5
3 From the drop-down menu, specify the view
size by selecting [Whole Page] or [Enlarge
View], and set [Current Page].
4 After the confirmation, select [Close] to close the preview screen.
Changing Scan Settings
You can change scan settings while scanning the document.
Note • For [Store to WSD]
*
, you cannot change the scan settings while scanning the document.
* : WSD stands for Web Services on Devices.
1 Select [Next Original].
2 Select [Change Settings].
3 Set [Color Scanning], [Original Type], [Resolution], [Lighten/Darken], [Original Orientation],
[2 Sided Scanning], and [Original size].
The following shows the reference section for each feature.
"Color Scanning (Selecting an Output Color)" (P.284)
"Original Type (Selecting the Document Type)" (P.286)
"Resolution (Specifying a Scanning Resolution)" (P.333)
"Image Options (Adjusting Scan Density and Image Sharpness)" (P.329)
"Original Orientation (Specifying the Orientation of the Loaded Document)" (P.340)
"2 Sided Scanning (Scanning Both Sides of a Document)" (P.334)
"Original Size (Specifying a Scan Size)" (P.335)
4 Press the <Start> button.
To Next Page
Loading...
Need help?
General
