Printing and Deleting Stored Jobs
411
Job Status
11
îš„ Delete
Deletes the Delayed Print job.
Refer to "When [Delete] is Selected" (P.411).
îš„ Print
Prints the Delayed Print job. After printing, the job is deleted. If printed manually, the job
will not be printed at the specified time.
Refer to "When [Print] is Selected" (P.411).
When [Delete] is Selected
1 Select [Delete].
îš„ Delete
Deletes the job.
Important •Once the job is deleted, it cannot be restored.
îš„ Cancel
Cancels deleting the job.
When [Print] is Selected
1 Select [Yes].
Note • The screen as shown on the right does not
appear if [Print Job Confirmation Screen] is
set to [Disabled] in the System
Administration mode. If [Disabled] is
selected, the machine automatically deletes
the job after printing without displaying the
confirmation screen. For more information,
refer to "5 Tools" > "Stored File Settings" >
"Print Job Confirmation Screen" in the
Administrator Guide.
îš„ Yes
Starts printing the job. After printing, the job is deleted.
îš„ No
Cancels printing the job.
Charge Print
This feature authenticates users on the machine to prevent unauthorized users from
operating print jobs. When this feature is enabled, the machine prints only the jobs of
authenticated users. You can also configure the machine to store print jobs temporarily, and
then print them from the machine’s control panel.
To Next Page
Loading...
Need help?
General
