First-time setup of your d evice
Switching o n the device for the first t ime
Switchingonforthefirst time
On devices with ON/OFF switch for wireless components: Slide the ON/OFF switch
for wireless components to the ON po sition before switching on the device.
When you switch on th e device for the first time, the supplied s oftware is
installed and configure d. Because this procedure must not be interrupted,
you should set aside eno ugh time for it to be fully completed and connect
the device to the mains using the m ains adapter.
During the installation process, DO NOT restart the device unless
you are requested to do so!
To make it easier to use your de
vice for the first time, the operating s ystem
is p re-installed on the hard
disk.
► Switch on your device.
► D uring installation, follow the instructions on screen.
If a Windows operating system is installed on yo ur device, you will find more
information on the system and drivers, help pro grammes, updates, manuals etc.
on the device or on the Internet at "
http://ts.fujitsu.com/support".
18 Fujitsu Technology Solutions
To Next Page
Loading...
Need help?
General