Working w ith the notebook
Optical drive
Opticaldrive
This product contains a light emitting diode, classi fied in accordance with IEC
8251:1993: LASER CLASS 1, and m ust therefore not be opened.
Handling data carriers
Handling
Observe the following guidelines when handling data carriers:
• Avoid touching the surface of a data carrier. Only handle data carriers by their edges.
• Always store data carriers in th
eir cases. T his will protect the data carrier against
being covered in du st, scratche
d or damaged in any other way.
• Protect your data carriers against dust, mechanical vibrations and direct sunlight.
• Avoid storing a data carrier in ar
eas subject to high temperatures or humidity.
You may use both 8-cm and 12-cm data carriers in the optical drive.
When using a data carrier of lesser quality, vibrations and reading errors may occur.
CD/DVD indicator
CD/DVDindicator
The CD/DVD indicator flashes when a data carrier is inserted. The indicator goes out when
the drive is ready for reading. The indicator lights up when the drive is being accessed.
You may only remove the data carrier when the indicator is unlit.
If the CD/DVD indicator does not go out after a data carrier has b een inserted, but
instead cont inues to flash, this means that the drive cannot access the data carrier.
Either the data ca rrier is damaged or dirty or you are using a data
carrier that the drive cannot read.
34 Fujitsu Technology Solutions
To Next Page
Loading...
Need help?
General