Security functions
Deactivating hard disk protection
To cancel a password without setting a ne w one, proceed as follows:
► Call up th e BIOS Setup and select the Security menu.
► Mark the Hard Disk Security field and press the Enter key.
► In the Drive0 area mark the Set Master Password field and p ress the Enter k ey.
You will be initially reque sted to enter the old password by the Enter current Password prompt.
You will th en be requested to enter a new password by th e Enter new Password prompt.
► After entering the password , press th e Enter key three times.
► Fr om the Exit menu, choose the optio n Exit Saving Changes.
► Press the Enter key and select Ye s.
The notebook reboots, and password protection for th e hard disk is cancelled.
► To cancel the password for the second hard disk (D r ive1 ), go to the Drive1 area
and select the field Set Master P assword, then proceed in exactly the same way as
for cancelling the password for the first hard disk (Dr ive0 ).
Fujitsu Technology Solutions 49
To Next Page
Loading...
Need help?
General