Working w ith the notebook
ExpressCards
SlotExpressCard
An ExpressCard slot enab les operation of an ExpressCard/34 or ExpressCard/54.
Consult the documentat ion supp lied by the ExpressCard’s manufacturer
and follow the instructions provided.
Never use force when installing or removing an E xpressCard.
Make sure that no foreign objects enter the ExpressCard slot.
Inserting the card
Keep the placeholder for the slot in a safe place. When you remove the card again you
must reinstall the placeholder. This prevents foreign bodies from getting into the slot.
1
2
► If the eject button ( 1) is recessed, press it
once so that it disengages. N ow p ress the
eject button again so that the placeholder
protrudes slightly from the no tebook.
► Pull the card p laceholder ou t of the slot (2 ).
► Insert the card into the slot guide with
the connection contacts first.
► Gently push the card into the slot either
until it will go no further or you feel it
engage. Do not use excessive force.
Depending on the type, the card may
protrude slightly from the slot.
Please see the documentation relating to t he card for driver installation instructions.
40 Fujitsu Technology Solutions
To Next Page
Loading...
Need help?
General