Working with the note book
Wireless LAN / Bluetooth / UMTS
The installation of a radio component not approved by Fujitsu Technology Solutions
GmbH will invalidate th e certifications issued for this device (CE!).
Switching the wireless com
ponents on and off
Before switching on your device for the first time, the on/off switch for
wireless components must be in the "ON" position.
► Slide the ON/OFF switch in
to the "ON"
position to activate the w
ireless components.
Wireless LANWireless LANBluetoothBluetooth
or
► Slide the ON/OFF switch to the
"OFF" position to deactivate the
wireless components.
The Bluetooth and UMTS mod ules an d the wireless L AN transmission unit (antenna)
will also be s witched off when you s witch off the wireless components.
You can also deactivate the wireless components individually in the BIOS Setup.In
order to be ab le to do this, you will either need to know the supervisor password
if one has been assigned , or no password must have been assigned.
Please read the additional safety notes for devices with wire less
components in the "Safety" manual.
Details on using Wireless LAN can be found in the online help system
included in the Wireless LAN software.
You can find more information on how to use Bluetooth on the CD you
received with your Bluetooth software.
You can obtain more information on UMTS from your service provider.
Fujitsu Technology Solutions 43
To Next Page
Loading...
Need help?
General