Working with the note book
Inserting or removing a data carrier
InsertingRemoving
The notebook must be switched on.
2
1
► Push the inse rt/eject button (1).
The drive tray will open.
► Gently pull the drive tra y (2) completely out.
► Place the data carrier in the drive tray with
the printed side facing upw ards.
or
► Re move a data carrier that has
been inserted.
► Push in the drive tray until you
feel it lock into place.
Manual removal (emergency removal)
CD/DVD:ManualremovalofdatacarrierEmergency r emovalofda tacarrier
In the e ven t of a power
failure or damage to the drive, you can remove the data carrier manually.
1
2
► Switch your noteboo
koff.
► Push a pen or a piece of wire (such as a
paperclip) firmly into the opening (1).
The drive tray is ejec
ted. You can now pull
the drive tray (2) out
of the drive.
Fujitsu Technology Solutions 35
To Next Page
Loading...
Need help?
General