7. NBDP SYSTEM OVERVIEW
7-4
Note 3: The carriage-return and line-feed codes "CR LF" are automatically sent with
pressing the Enter key during NBDP communication. Press the ← or ↓ key if you want
to send only "CR" or "LF".
Note 4: "Letter Shift" and "Figure Shift" are automatically inserted if necessary. If you
want to send them purposely, press the following keys:
• "Letter Shift": Ctrl + Shift + L
• "Figure Shift": Ctrl + Shift + F
• "NOINF" ("Cyrillic Shift" in Russian mode): Ctrl + Shift + R
Note 5: Do not connect or disconnect the keyboard during operating the terminal unit.
7.3 Encoding Setting
If changing the encoding setting, you can assign a specific key to a local character
code. Contact your dealer about changing of the encoding setting.
*1: The appearance of “ “ is not case-sensitive.
*2: To send the character “ “ in UK encoding setting, press the “ [ “ key assigned “ “
instead of Shift + 2.
*3: To send the character “ “ in UK encoding setting, press the “ ] “ key assigned “ “
instead of Shift + 5.
Encoding setting “ [ “ key “ ] “ key
“ “ key
Normal (default) – – –
Norway
*1
Sweden
UK
*2
*3
To Next Page
Loading...
Need help?
General
