6. MENU OPERATION
6-10
6.9 Timeout Setting
The menu screen and/or the inactive sessions (icons) can be closed automatically
when there is no menu operation for a specific time. You can set the time interval for
auto closing of the menu and inactive session.
1. Rotate the ENTER knob to select [SYSTEM] on the [MENU] screen then push the
knob.
2. Rotate the ENTER knob to select [TIMEOUT] then push the knob.
3. Rotate the ENTER knob to select the item desired then push the knob.
4. Rotate the ENTER knob to select time interval then push the knob. [NO TIME-
OUT] leaves the menu screen and/or the inactive sessions open until you close
them manually.
*: Refer to section 6.10.
6.10 FAX Enable/Disable
You can enable or disable FAX use as follows.
1. Rotate the ENTER knob to select [SYSTEM] on the [MENU] screen then push the
knob.
2. Rotate the ENTER knob to select [RX SETUP] then push the knob.
3. Rotate the ENTER knob to select [FAX RX] then push the knob.
Item Description Option
[MENU END] Close the menu screen automatically. 10MIN, NO TIMEOUT
[DSC
GENERAL]
Close the inactive sessions except the dis-
tress alert.
15MIN, NO TIMEOUT
[RX
DISTRESS]
Close the inactive sessions for the receiving
distress alert.
[SSB] Close the inactive sessions for RT of SSB and
LSB.
10SEC, 30SEC, 10MIN
[TELEX] Close the inactive sessions for RT of TELEX. 10SEC, 30SEC,
10MIN, NO TIMEOUT
[FAX]* Close the inactive sessions for RT of FAX.
[AM] Close the inactive sessions for RT of AM.
*: [FAX] is unavailable.
To Next Page
Loading...
Need help?
General
