6. MENU OPERATION
6-5
6.2.6 How to select user channels for SSB mode
Rotate the ENTER knob to select the user channel desired on the [USER CH] list then
press the 8 key. The RT screen for the selected user channel appears.
6.3 Log File
Three log file modes are provided for storage of calls:
• [RX GENERAL] (received ordinary log)
• [RX DISTRESS] (received distress log)
• [TX] (transmitted log)
Each mode stores 50 calls. The latest call is saved as log no.1 and the log no. of all
previous calls in that log increments by one. When the storage capacity is exceeded,
the oldest call is deleted to make a room for the latest. The icon ( ) indicates unread
calls. Received distress calls are automatically deleted after 48 hours.
6.3.1 How to open a log file
The procedure to open a log is common to all logs.
1. Rotate the ENTER knob to select [LOG] on the [MENU] screen then push the
knob.
2. Press the 6 key to switch the log file mode in the sequence of [RX DISTRESS] →
[RX GENERAL] → [TX] → [RX DISTRESS] → ...
Press
the 8
key.
Mode
LIST
30
2 / 5
8
9
10
11
12
13
14
To Next Page
Loading...
Need help?
General
