6. MENU OPERATION
6-16
6.16 TX Message Preparation
For the individual, PSTN, group and test messages, you can create messages and
store them in the memory for future use. You can edit, send or delete these messages.
A maximum of 100 messages can be stored into the memory.
6.16.1 List for message files
1. Rotate the ENTER knob to select [DSC] on the [MENU] screen then push the
knob.
2. Rotate the ENTER knob to select [MSG FILE] then push the knob.
Detailed information screen for message files
Rotate the ENTER knob to se-
lect the message file desired
on the [MESSAGE FILE] list
then push the knob. The de-
tailed information screen for
the selected message file ap-
pears as shown right.
Several functions can be done
from this screen.
• 1 key: Go to the detailed in-
formation screen for the previous message file.
Key/knob Function
ENTER • Move the cursor by rotating the ENTER knob.
• Open the detailed information screen for the selected message file by
pushing the ENTER knob (see the following "Detailed information
screen for message files").
CANCEL Return to the [MENU] screen.
1 Go to the previous page.
3 Go to the next page.
4 Delete messages (see paragraph 6.16.8).
5 Open the [MESSAGE FILE ENTRY] screen.
6 Switch the message type. Each press changes the type continuously
(INDIVIDUAL → GROUP → PSTN → TEST → INDIVIDUAL → ...).
When 100 messages
are registered, this is
not available.
10
70
29
To Next Page
Loading...
Need help?
General
